Abs Ate Mk25 Nissan Atleon 3.0 TD
- DiPa Code:
- ABS1992R
- OEM Code:
- 476609X60A
- Brand:
- DIPA SPORT
- Cod.Cross:
- Condition:
- Remanufactured
Warnings
Send the spare partWITHOUT SUPPORTSandSCREWSattached, we will not be held responsible in case of breakage or loss of the same.
The indicated cost represents the average revision cost for this type of spare part.
The final quote will be formalizedin writingafter evaluation and possible acceptance by the technical department, based on the faults specifically reported in the repair request.
Note Wellthe quote you will receive refersonlyto the defects indicated in the initial request, DIPA will carry out the revision interventionexclusivelyon the reported faults.
In case anyfurther issuesarise during processing, DIPA will promptly inform you, specifying any changes to theprocessing timesand to thequoted amount. Only after yourwritten approvalof such changes will we proceed with the completion of the repair.
Typical Errors and Defects
Typical Defects:
One or more wheels do not brake, brake fluid does not reach the calipers
One or more wheels remain locked
The brake pedal sinks
Error codes related to the ABS pump motor
No communication between abs and diagnostic system, does not detect speed on the instrument panel
Applications
NISSAN
NISSAN ATLEON
| Model | Year of Production | Displacement | KW | HP | Cylinders | Fuel Type | Engine Code |
|---|---|---|---|---|---|---|---|
| ATLEON | 1999-09-01 - 2006-08-01 | 5985 cc | 151 KW | 205 HP | Cylinders | ||
| ATLEON | 1999-09-01 - 2006-08-01 | 5985 cc | 117 KW | 159 HP | Cylinders | ||
| ATLEON | 2000-09-01 - | 2953 cc | 78 KW | 106 HP | Cylinders | ||
| ATLEON | 2000-09-01 - | 3990 cc | 100 KW | 136 HP | Cylinders | ||
| ATLEON | 2000-09-01 - | 5985 cc | 117 KW | 159 HP | Cylinders | ||
| ATLEON | 2003-09-01 - | 2953 cc | 87 KW | 118 HP | Cylinders | ||
| ATLEON | 2003-09-01 - | 3990 cc | 100 KW | 136 HP | Cylinders | ||
| ATLEON | 2003-09-01 - | 5985 cc | 117 KW | 159 HP | Cylinders | ||
| ATLEON | 2003-09-01 - | 5985 cc | 151 KW | 205 HP | Cylinders | ||
| ATLEON | 2004-01-01 - 2006-08-01 | 5985 cc | 117 KW | 159 HP | Cylinders | ||
| ATLEON | 2004-01-01 - 2006-08-01 | 5985 cc | 151 KW | 205 HP | Cylinders | ||
| ATLEON | 2006-08-01 - | 2953 cc | 110 KW | 150 HP | Cylinders | ||
| ATLEON | 2006-10-01 - | 2953 cc | 110 KW | 150 HP | Cylinders | ||
| ATLEON | 2006-10-01 - | 4460 cc | 136 KW | 185 HP | Cylinders | ||
| ATLEON | 2006-10-01 - | 2953 cc | 92 KW | 125 HP | Cylinders | ||
| ATLEON | 2006-10-01 - | 3990 cc | 100 KW | 136 HP | Cylinders |
Techinical Info
The Nissan code 476609X60A (sometimes also shown as 47660-9X60A) identifies a complete ATE MK25 ABS assembly, consisting of a hydraulic block with solenoid valves and a coupled electronic control unit (ECU), plus a recirculation motor/pump. It is an ABS unit typical of Nissan truck/LCV (commercial vehicle) applications, where the control unit manages brake pressure modulation to prevent wheel lock-up and ensure braking stability on low-adhesion surfaces.
Technical characteristics
- Main components: Electric pump (motor + pumping unit) for pressure recovery/management during ABS phases; internal solenoid valves (wheel channels) for pressure release/hold/rebuild; ABS ECU with diagnostics and control logic management.
- Network and signals: handling of signals from wheel speed sensors and communication with the vehicle network (typically CAN, depending on the equipment).
DIPA can intervene to overhaul these components thanks to its experience and expertise.
Functions
- ABS control with pressure modulation on each wheel channel based on: wheel speed and calculated slip; braking and adhesion conditions
- Self-diagnostics and circuit monitoring: consistency of wheel sensor signals; checking pump/motor operation; monitoring integrity of solenoid valve circuits and internal power supplies
- Warning light management and fault memory: records anomalies (intermittent or permanent) and enables degraded modes when necessary.
Model applications
- Nissan Atleon
Typical faults
- One or more wheels do not brake; brake fluid does not reach the calipers
- One or more wheels remain locked
- Brake pedal sinks
- Error codes related to the ABS pump motor
- No communication between ABS and the diagnostic system; speed not detected on the instrument cluster
Final conclusions
The ABS ATE MK25 unit with Nissan code 476609X60A is an integrated hydraulic-electronic assembly typical of Nissan commercial vehicles.
DIPA has a wide range of spare parts dedicated to the truck sector, construction vehicles and industrial equipment. Not only that: it offers refurbished components restored to like-new performance, which can provide savings on replacements while contributing to environmental protection through the circular economy. If the part you need is not available, don't worry: DIPA can overhaul your item "on demand", returning full functionality and safety in a short time.