Clutch Actuator Toyota Psa

Typical Defects:
The engine does not start
The gearbox fails to engage the gears
N warning light on the instrument panel
The gear is in N

Error Codes:
P0810 - Clutch Position Control / Clutch Actuator Error
P0900 - Clutch Actuator Circuit

The clutch actuator identified by the original code 1612434480 è is an electromechanical component installed on compact vehicles of the PSA group (Citroë, Peugeot) and Toyota, equipped with automated transmission. This system è commonly known as automated gearbox, like the SensoDrive, is present on models with small displacement engines.

The actuator is responsible for automatically managing the engagement and disengagement of the clutch, simulating the action of a traditional clutch pedal. It works in combination with an ECU and a gear actuator, allowing driving without the direct use of the clutch pedal, while maintaining a mechanical gearbox with engagement.

Technical characteristics

The OE component 1612434480 it presents itself as a compact module equipped with:

• Die-cast aluminum body with integrated electric motor
• Clutch position sensor
• Linear push mechanism on clutch lever
• Internal epicyclic gears for the translation of the’rod
• Multipole connector for interface with the transmission control unit
• Mechanical interface compatible with the gearbox bell of PSA/Toyota models

The actuator is electrically powered and managed by the transmission control unit, which receives signals from the accelerator pedal position sensor, engine RPM, vehicle speedà and gear requests.

DIPA has a range of original and aftermarket quality spare parts.à equivalent.

Functionalityà

Its task è is to automatically engage the clutch at the moment of gear shifting or starting, performing:

• Clutch disengagement during gear shifting or stopping
• Gradual engagement of the clutch during acceleration
• Torque management for uphill starts or stops

All of this occurs in milliseconds thanks to precise electronic control, allowing for semi-automatic driving without a clutch pedal. È an essential component in the robotic transmissions of small city cars from the PSA/Toyota group.

Brand and model on which the part è is mounted

Citroën

• C1

Peugeot

• 107
• 108

Toyota

• Aygo

All listed models use automated transmissions based on manual gearboxes with an electronic actuation system. The code is also associated with special versions or restyling of the aforementioned vehicles, purché equipped with the controlled clutch system.

DIPA recommends always checking compatibilityà based on the specific engine code and chassis number.

Defects and causes

The anomalies of the’clutch actuator 1612434480 are quite common with increasing mileage. The reported defects include:ù The reported defects include:

• Wear of internal gears: causes noise or irregular movements
• Failure of the internal electric motor: leads to the failure of the clutch actuation
• Faulty position sensor: sends incorrect signals to the control unit, blocking the system
• Accumulation of dirt or seizing of the mechanism: due to leaks or compromised seals
• Error in’alignment during assembly: canò cause the transmission to be stuck in neutral (N)

Obvious symptoms

• The engine does not start
• The transmission fails to engage gears
• N warning light on the instrument panel
• The gear shifts to N

Error Codes:

• P0810 - Clutch Position Control Error / Clutch Actuator
• P0900 - Clutch Actuator Circuit

Final conclusions

The’clutch actuator with OE code 1612434480 è is a key component in robotic transmissions mounted on Citroën C1, Peugeot 107 and Toyota Aygo, first series.

DIPA provides the component in new, original, and quality aftermarket versionsà ready-to-install equivalent’with warranty and compatibilityà for all affected models. Ask for availabilityà of spare parts ready in stock for quick replacements and reduced vehicle downtime.