Seletron Motorized Solenoid Valve for Single Nozzle Holder

Typical Faults:
The nozzle does not work or works irregularly
Abnormal electrical current draw

The solenoid valve (I699461) SELETRON SINGLE VALVE is an actuator for agricultural spraying systems, designed to individually control the single nozzle mounted on ARAG-compatible nozzle holders. Its function is to selectively open and close the liquid flow at each point of the boom, turning every nozzle into an independent section. This allows much more precise management of product distribution, reducing overlaps and increasing operational accuracy during treatments using sprayers.

Technical specifications

• Single solenoid valve for individual nozzle control.
• Use on ARAG nozzle holders prepared for SELETRON technology.
• Supply voltage 12 V.
• Nominal electrical consumption of about 0.32 A.
• Maximum operating pressure up to 8 bar.
• Control via Can Bus / 3-wire network.
• Tyco Superseal 1.5 female connectors.
• Approximate opening time 0.2 seconds.
• Approximate closing time 0.5 seconds.
• Indicative operating temperature range 0 °C to 60 °C.
• Body made of technical materials suitable for the agricultural environment.
• Availability with different diaphragm or seal materials, including Viton, Teflon, Desmopan and EPDM, depending on the variant.

DIPA can service these components thanks to its experience and expertise.

Functions

• Selective opening of the individual nozzle.
• Rapid closing of the individual nozzle.
• Independent management of each position along the boom.
• Reduction of overlaps at headlands and in irregular areas.
• Optimization of product distribution.
• Integration with electronic spraying control systems.
• Communication via the dedicated SELETRON system network.
• Greater precision in operations compared to traditional section-based systems.

Applicable models

• ARAG nozzle holders prepared for single-valve use on sprayers for fertilizers and phytosanitary products.

Typical faults

• The nozzle does not work or works irregularly.
• Abnormal electrical consumption.

Final conclusions

The ARAG SELETRON SINGLE VALVE solenoid is the single version used for independent control of the individual nozzle in precision spraying systems for fertilizers and phytosanitary products.

DIPA has a wide range of spare parts dedicated to the Agri sector: from vehicle-related parts to those for auxiliary equipment. In addition, it offers reconditioned components with performance comparable to new, enabling savings on replacements and contributing to environmental protection through the circular economy. If the spare part you need is not available, don’t worry: DIPA can refurbish your part "on demand", restoring full functionality and safety in a short time.