Danfoss S5X-15 G2 AMP K167C Amplifier Module for Mobile System Applications
- DiPa Code:
- CTRLDANFOSS001R
- OEM Code:
- 517997
- Brand:
- SAUER DANFOSS
- Cod.Cross:
- Condition:
- Remanufactured
Typical Errors and Defects
Typical Faults:
Failure to power on, resets or reboots
One or more functions are unavailable
The module does not power on
Applications
LANDINI
LANDINI REX
| Model | Year of Production | Displacement | KW | HP | Cylinders | Fuel Type | Engine Code |
|---|---|---|---|---|---|---|---|
| REX | 2003-11-01 - | 3299 cc | 50 KW | 68 HP | Cylinders | ||
| REX | 2011-11-01 - | 4399 cc | 54 KW | 74 HP | Cylinders | ||
| REX | 2011-11-01 - | 4399 cc | 68 KW | 92 HP | Cylinders | ||
| REX | 2011-11-01 - | 4399 cc | 81 KW | 110 HP | Cylinders |
PEUGEOT
PEUGEOT EXPERT (224_)
| Model | Year of Production | Displacement | KW | HP | Cylinders | Fuel Type | Engine Code |
|---|---|---|---|---|---|---|---|
| EXPERT (224_) | 2000-07-01 - 2006-12-01 | 1997 cc | 80 KW | 109 HP | 4 Cylinders | Diesel | RHW (DW10ATED4) |
Techinical Info
The code OE 517997 is the control unit module Sauer-Danfoss S5X-15. It can be applied to various platforms, but specifically the code indicates a software version/application calibration configured for Landini Mythos series tractors.
It is an electronic module equipped with a high-performance microprocessor to manage hydraulic solenoid valves in the work processes of agricultural/industrial machines by processing the commands given by the operator. Thanks to its integrated logic, it can operate either in finite cycles (open loop) or in continuously repeating cycles (closed loop) to perform the required tasks. In combination with specific sensors, it can control both linear and rotary actuators, proving to be a versatile and powerful aid. It can be programmed in multiple ways so the same hardware can be used for a multitude of different tasks.
Technical specifications
- Power supply: 12 VDC
- Processor: Siemens SAF C167 CR-LM
- Flash memory: 1 MByte; RAM: 256 kByte
- Sensor power: 5 VDC line available for sensors/transducers
- High-Speed CAN compliant with CAN 2.0B with physical layer ISO 11898
- Operating temperature range between -40 °C and approximately +70 °C
- Resistance to vibration and shock for heavy-duty use
- Typical electrical protections: reverse polarity, overvoltage and transients; ESD/EMI/RFI compatibility and load-dump resistance
- Diagnostics: status/error LED with signaling logic (blink code) and internal diagnostic functions
DIPA can intervene to overhaul these components thanks to its experience and expertise.
Functions
- With integrated logic it operates in open-loop finite cycles or in closed-loop continuous cycles as set by the operator.
- Maximum versatility: with specific sensors it controls linear and rotary actuators; the same hardware can be used for varied tasks.
- Sensor and machine signal reading: digital states (permissions, pedals, levers, interlocks); analog values 0–5 V (pressures, positions, potentiometers); PPU frequency signals (speed/rotations/position).
- Actuator driving: PWM commands for proportional/hydraulic valves; dedicated outputs for gear/engagement solenoids.
Model applications
- Landini Mythos Series tractors
Typical faults
- Failure to power on, resets or reboots
- One or more functions are unavailable
- The module does not turn on.
Final conclusions
The Danfoss OE 517997 is a Sauer-Danfoss S5X-15 control unit configured for Landini Mythos.
DIPA has a wide range of spare parts dedicated to the Agri sector: from vehicle-related parts to those for auxiliary equipment. In addition, it offers reconditioned components with like-new performance that allow savings when replacing parts while contributing to environmental protection through the circular economy. If the spare part you need is not available, don't worry: DIPA can overhaul your part "on demand", restoring full functionality and safety in a short time.