Seeding Control Terminal V1200 Male Gaspardo

Typical faults:
The display does not turn on or is difficult to read
One or more buttons do not work
Incorrect indications of operating parameters
Incorrect area counting
Anomaly alarm

The control panel Maschio Gaspardo V1200 (OE F05010578) is a module dedicated to monitoring seed placement on precision seeders from the Gaspardo group. It is a terminal designed for the operational supervision of the machine during field work, with the function of controlling seed passage row by row and managing up to 12 rows.

The main task of the V1200 is to verify the regularity of sowing and to alert the operator when one or more rows are not working correctly. In the presence of anomalies, the monitor generates a visual and audible alarm, allowing quick intervention before the fault compromises the quality of seed placement. In addition to sowing control, the device also integrates functions for counting total area, partial area and working hours.

Technical specifications

• Monitor for single-seed pneumatic precision seeders
• Management from 2 to 12 rows
• Nominal supply 13 Vdc ± 3 Vdc
• Maximum monitor consumption 0.42 A
• Monitor protection rating IP65
• Resistance to mechanical vibrations 2 G
• Operating temperature from -20 °C to +70 °C
• Permitted relative humidity 90%
• Transport and storage temperature from -25 °C to +85 °C
• Inductive speed sensor with protection IP67
• Photocells with protection IP67
• Photocell supply 8-10 Vdc
• Photocell output signal NPN-NO
• Maximum photocell frequency 200 Hz
• Maximum photocell sensing distance 40-80 mm
• Main connector FCI Sicma 24-pin IP67
• Photocell connectors AMP 3-pin Superseal IP67
• Indicative weight of the component around 0.756 kg in equivalent commercial versions

DIPA can intervene to overhaul these components thanks to its experience and expertise.

Functions

• Continuous monitoring of sowing regularity for each row
• Audible alarm in case of anomaly
• Visual indication of the row or rows affected by the fault
• Display of operational information on an LCD screen
• Partial hectare counting
• Total hectare counting
• Working hours counter
• Working width programming
• Programming of the counting constant based on the speed sensor
• Adjustment of sowing detection sensitivity
• Compatibility with standard photocells and with some configurations dedicated to small seeds

Model applications

• Maschio Gaspardo precision seeders

Typical faults

• The display does not turn on or is difficult to read
• One or more buttons do not work
• Incorrect indication of operational parameters
• Incorrect area counting
• Anomaly alarm

Final conclusions

The Maschio Gaspardo V1200 code OE F05010578 is a sowing control panel designed for the electronic management of single-seed pneumatic precision seeders of up to 12 rows. Its importance is high because it allows the operator to monitor in real time the correct operation of the machine, quickly identifying any interruptions in seed flow or irregularities between rows.

DIPA offers a wide range of spare parts dedicated to the Agri sector: from those related to vehicles to those dedicated to auxiliary equipment. Furthermore, it offers overhauled components with performance equivalent to new ones, which can provide savings when replacing parts and contribute to environmental protection through the circular economy. If the spare part you need is not available, don’t worry: DIPA can overhaul your part "on demand", returning full functionality and safety in a short time.