Important Notice

Control module for Tanco AutoWrap winders

DiPa Code:
DASH785R
OEM Code:
ABWTKCK
Brand:
DIPA SPORT
Condition:
Remanufactured
Overhaul of the cab operator panel for automatic control of wrapping, wrap counting, cutting and unloading
To view availability and prices, login or register
Are you a private individual? Find out how we can help you
Typical Errors and Defects
Typical faults: Buttons not working due to wear or dirt; Faulty LCD display (missing segments, hard to read); 12V power issues (cracked solder joints, corrosion, connectors); Water/dust ingress damaging the internal board; Components burnt by voltage spikes; Software freezes requiring a reset.
Techinical Info

The code ABWT.KCK identifies the operator cabin panel of Tanco AutoWrap balers. The module manages the entire wrapping cycle in automatic and manual modes, interfacing with machine sensors and the hydraulic group's solenoid valves for table/arm rotation, film cutting and reattachment, tipping/unloading and auxiliary functions.

Technical specifications

  • Power supply: 12 V DC with direct connection to the tractor battery (dedicated positive and ground).
  • User interface: display (4-digit/alphanumeric, depending on the version) and membrane keypad with start/stop, A/M, Add Wrap buttons, individual motion commands.
  • Programming: Store memories A–J, Partial and Grand Total; operating parameters with Operator and Technician levels (protected access).
  • Counting and target: setting number of wraps/table revolutions (0–99), display of cycle status and operational alarms.
  • I/O: outputs to numbered solenoid valves (including the "master" valve); inputs from rpm/position sensor and limit switches for cutter and tipping.
  • Protections/logic: alarm handling (film break, overspeed), stop-in-position for cutting and restart, data reset.

DIPA can intervene to overhaul these modules thanks to its experience and expertise.

Functions

  • One-touch automatic cycle with wrap counting, positioning for film cutting/attachment and unloading sequence.
  • Manual mode for diagnostics and single movements (table/arms, cutter open/close, tip up/down).
  • Add Wrap during the cycle or on the next bale to increase wrapping turns.
  • Work statistics with memories, partials and totalizers.
  • Indicators and safety with messages/icons on the display and interlocks to prevent incorrect operations.

Model applications

  • Tanco AutoWrap balers of various series (e.g. 13xx/1310/1320 and related models), equipped with the AutoWrap family panel
  • Typical faults
  • Buttons not working due to wear or dirt.
  • LCD display failure (missing segments, poor legibility).
  • 12V power issues (cracked solder joints, corrosion, connectors).
  • Water/dust ingress damaging the internal board.
  • Components burned by voltage spikes.
  • Software locks requiring a reset.

Final conclusions

The TANCO ABWT.KCK is the heart of the AutoWrap cycle management: it enables reliable automation and rapid field diagnostics.

DIPA has a wide range of spare parts dedicated to the Agri world: from vehicle-related parts to those for auxiliary equipment. Not only that: it offers reconditioned components with like-new performance that can provide savings on replacements while contributing to environmental protection through the circular economy. If the spare part you need is not available, don't worry: DIPA can recondition your part "on demand", restoring full functionality and safety in a short time.