Gasoline Injector Nissan 1.3 DIG-T

The injector 1752600Q0D is a Continental component for Nissan 1.3 engines from 2018 onwards.

Technical specifications

• Type: high-pressure EV6 injector, turbo gasoline Common‑Rail system (TCE 1.3 L)
• Nozzle holes: 4 (typical “V spray” configuration), standard EV6/Sumitomo nozzle
• Connector: Sumitomo-standard connection for use on 1.3 TCE engines
• Typical flow: 300 cc/min measured at 3 bar (43.5 psi), corresponding to about 29 lb/h (220 gpm)
• Impedance: high, around 12–14 Ω, suitable for the electronic profile of Renault/Nissan injection systems

Vehicle applications

Nissan

• Qashqai
• X-Trail

DIPA recommends always carefully checking the part number to ensure compatibility with your engine.

Typical faults

• Carbon deposits on the nozzle, causing incorrect fuel atomization (uneven spray) and engine power loss
• Intermittent malfunctions, often occurring only when cold, with minor irregularities or vibrations
• Oil and fuel residues due to poor combustion, felt as increased consumption or smoke from the exhaust
• Unstable ohmic resistance (<12 Ω or >14 Ω) may indicate a deteriorated internal coil
• Check engine light warnings or misfires when the nozzle is partially blocked

Typical symptoms

• Tendency to “tick” when cold, returning to normal after warming up
• Vibrations or abnormal loss of power during acceleration or gear changes
• Unexplained increase in fuel consumption (an extra 1 to 2 l/100 km)

Conclusion

The injector 1752600Q0D is an essential component for the operation of 1.3 engines. If replacement is necessary, various options are available to the customer.

DIPA provides components in new, original and equivalent-quality aftermarket versions, ready for installation, with warranty coverage and compatibility across all affected models. Ask about stock availability for ready-to-install parts to enable quick replacements and reduced vehicle downtime.