Rear right brake caliper Mazda NA752671XC

It is strongly recommended to replace BOTH brake calipers on the same axle.

INSTALLATION INSTRUCTIONS FOR THE BRAKE CALIPERS

• The installation MUST always be carried out by a qualified technician, following the guidelines of the vehicle manufacturer.
• Do not engage the handbrake or the brake pedal before completing the installation.
• If the vehicle is equipped with electronic parking brake (EPB)connect the diagnostic unit and follow the vehicle manufacturer's instructions.
• After completing the installation of the calipers, perform the actuator calibration procedures, always using the diagnostic tool.
• For the REAR CALIPERS ensure that the gap between the pads and the brake disc is a maximum of 1 mm on each side.
• If the gap exceeds 2 mm in total, adjust the piston.
• Replace discs and pads if necessary.
• Perform a brake test, on a test bench and on the road, to verify its proper functioning.