New Turbocharger Iveco Stralis Trakker

DiPa Code:
TRB682DPSN
OEM Code:
102076
Condition:
New
Turbocharger Supercharging
To view availability and prices, login or register
Are you a private individual? Find out how we can help you
Warnings

ADVICE AND WARNINGS TO FOLLOW BEFORE REPLACING THE TURBO

Before changing the turbocharger, it is essential to understand the causes that led to its failure.

The operations described below, ,are fundamental to avoid a second failure and consequently ,a warranty claim.

In case of a warranty claim, the execution of these fundamental replacement/cleaning operations must be demonstrable through an invoice. If they do not appear, the warranty claim will NOT be considered.

 ,

DEPENDING ON THE IDENTIFIED ISSUE, PERFORM THE FOLLOWING OPERATIONS FOR A CORRECT REPLACEMENT OF THE TURBO.

 ,

LUBRICATION

- Accurate cleaning and/or replacement of the oil inlet and outlet pipes.

- The turbo failure may have generated metal shavings that circulate freely in the lubrication system. Before performing the intervention, replace the lubricating oil along with the respective filter. After the intervention is completed, briefly run the engine to facilitate the removal of impurities and change the oil and filter again.

- Check that the oil pump pickup inside the sump is not clogged. If so, clean thoroughly and/or replace the oil pump.

- Check the efficiency and perform a thorough cleaning of the oil vapor recovery valve.

ASPIRATION ,( The turbo whistles during acceleration )

- Check that the air intake hoses of the turbocharger do not have cracks; if so, replace them. A small piece of rubber sucked in by the turbo that impacts the impeller at a speed of 100.000 RPM has devastating effects.

- Change the air filter.

- Clean and/or replace the intercooler and its related hoses.

SCARICO ,( The turbo whistles on release)

- Check the integrity of the internal module of the FAP/DPF/CAT and replace it if necessary. If it is intact, perform an internal regeneration/cleaning.

- Check the efficiency of the EGR valve. Perform a thorough cleaning of it and the ducts of the exhaust gas recirculation system.

Applications
ASTRA
ASTRA HD 8
Model Year of Production Displacement KW HP Cylinders Fuel Type Engine Code
HD 8 2007-06-01 - 7790 cc 243 KW 330 HP 6 Cylinders Diesel F2BE3681B
HD 8 2007-06-01 - 7790 cc 265 KW 360 HP 6 Cylinders Diesel F2BE3681A
IRISBUS
IRISBUS ARWAY
Model Year of Production Displacement KW HP Cylinders Fuel Type Engine Code
ARWAY 2005-01-01 - 2013-12-01 7790 cc 243 KW 330 HP 6 Cylinders Diesel F2BE3681B
IVECO
IVECO STRALIS I
Model Year of Production Displacement KW HP Cylinders Fuel Type Engine Code
STRALIS I 2003-06-01 - 7790 cc 228 KW 310 HP 6 Cylinders Diesel F2BE3681C
STRALIS I 2003-06-01 - 7790 cc 228 KW 310 HP 6 Cylinders Diesel F2BE0681B
STRALIS I 2003-06-01 - 7790 cc 259 KW 352 HP 6 Cylinders Diesel F2BE3681A
STRALIS I 2003-06-01 - 7790 cc 259 KW 352 HP 6 Cylinders Diesel F2BE0681A
STRALIS I 2004-04-01 - 7790 cc 228 KW 310 HP 6 Cylinders Diesel F2BE3681C
STRALIS I 2006-12-01 - 7790 cc 243 KW 330 HP 6 Cylinders Diesel F2BE3681B
STRALIS I 2007-05-01 - 7790 cc 265 KW 360 HP 6 Cylinders Diesel F2BE3681A
STRALIS I 2007-05-01 - 7790 cc 243 KW 330 HP 6 Cylinders Diesel F2BE3681B
STRALIS I 2007-06-01 - 7790 cc 243 KW 330 HP 6 Cylinders Diesel F2BE3681B
STRALIS I 2007-07-01 - 7790 cc 265 KW 360 HP 6 Cylinders Diesel F2BE3681A
IVECO TRAKKER I
Model Year of Production Displacement KW HP Cylinders Fuel Type Engine Code
TRAKKER I 2004-10-01 - 7790 cc 228 KW 310 HP 6 Cylinders Diesel F2BE0681B
TRAKKER I 2004-10-01 - 2007-10-01 7790 cc 259 KW 352 HP 6 Cylinders Diesel F2BE0681A
TRAKKER I 2004-10-01 - 2007-10-01 7790 cc 259 KW 352 HP 6 Cylinders Diesel F2BE3681A
TRAKKER I 2004-10-01 - 2007-10-01 7790 cc 228 KW 310 HP 6 Cylinders Diesel F2BE0681B
TRAKKER I 2004-10-01 - 2012-12-01 7790 cc 259 KW 352 HP 6 Cylinders Diesel F2BE0681A
TRAKKER I 2004-10-01 - 2012-12-01 7790 cc 265 KW 360 HP 6 Cylinders Diesel F2BE3681A
TRAKKER I 2004-10-01 - 2012-12-01 7790 cc 259 KW 352 HP 6 Cylinders Diesel F2BE3681A
TRAKKER I 2004-10-01 - 2012-12-01 7790 cc 228 KW 310 HP 6 Cylinders Diesel F2BE0681B
TRAKKER I 2004-11-01 - 2007-10-01 7790 cc 259 KW 352 HP 6 Cylinders Diesel F2BE0681A
TRAKKER I 2004-11-01 - 2007-10-01 7790 cc 265 KW 360 HP 6 Cylinders Diesel F2BE3681A
TRAKKER I 2004-11-01 - 2007-10-01 7790 cc 228 KW 310 HP 6 Cylinders Diesel F2BE0681B
TRAKKER I 2004-11-01 - 2012-12-01 7790 cc 265 KW 360 HP 6 Cylinders Diesel F2BE3681A
TRAKKER I 2004-11-01 - 2012-12-01 7790 cc 243 KW 330 HP 6 Cylinders Diesel F2BE3681B
TRAKKER I 2005-01-01 - 2007-10-01 7790 cc 259 KW 352 HP 6 Cylinders Diesel F2BE3681A
TRAKKER I 2005-01-01 - 2007-10-01 7790 cc 259 KW 352 HP 6 Cylinders Diesel F2BE0681A
TRAKKER I 2005-02-01 - 2007-10-01 7790 cc 259 KW 352 HP 6 Cylinders Diesel F2BE0681A
TRAKKER I 2005-06-01 - 2007-10-01 7790 cc 228 KW 310 HP 6 Cylinders Diesel F2BE3681C
TRAKKER I 2005-06-01 - 2007-10-01 7790 cc 259 KW 352 HP 6 Cylinders Diesel F2BE0681A
TRAKKER I 2005-06-01 - 2007-10-01 7790 cc 228 KW 310 HP 6 Cylinders Diesel F2BE0681B
TRAKKER I 2006-03-01 - 7790 cc 265 KW 360 HP 6 Cylinders Diesel F2BE3681A
TRAKKER I 2006-03-01 - 2007-10-01 7790 cc 265 KW 360 HP 6 Cylinders Diesel F2BE3681A
TRAKKER I 2006-03-01 - 2012-12-01 7790 cc 243 KW 330 HP 6 Cylinders Diesel F2BE3681B
TRAKKER I 2006-03-01 - 2012-12-01 7790 cc 265 KW 360 HP 6 Cylinders Diesel F2BE3681A
TRAKKER I 2006-04-01 - 2007-10-01 7790 cc 265 KW 360 HP 6 Cylinders Diesel F2BE3681A
TRAKKER I 2006-04-01 - 2012-12-01 7790 cc 265 KW 360 HP 6 Cylinders Diesel F2BE3681A
TRAKKER I 2006-06-01 - 2012-12-01 7790 cc 265 KW 360 HP 6 Cylinders Diesel F2BE3681A
TRAKKER I 2007-01-01 - 2012-12-01 7790 cc 265 KW 360 HP 6 Cylinders Diesel F2BE3681A
TRAKKER I 2007-01-01 - 2012-12-01 7790 cc 228 KW 310 HP 6 Cylinders Diesel F2BE3681C
TRAKKER I 2007-07-01 - 2007-10-01 7790 cc 243 KW 330 HP 6 Cylinders Diesel F2BE3681B
TRAKKER I 2007-07-01 - 2012-12-01 7790 cc 265 KW 360 HP 6 Cylinders Diesel F2BE3681A
Techinical Info

The turbocharger with code OE IVECO 504269281 belongs to the Holset HE431V turbo family fitted on FPT/Iveco Cursor 8 engines. It is a component intended for industrial vehicle and bus applications, particularly those based on the Stralis and Trakker platforms.

Technical specifications

  • Turbo family: Holset HE431V
  • Engine application: Cursor 8
  • Turbo architecture: variable geometry
  • Geometry control system: pneumatic actuation managed by the engine system
  • Center housing cooling: oil and water cooling

DIPA can intervene to overhaul these components thanks to its experience and expertise.

Functions

  • Uses exhaust gas energy to compress the air drawn into the engine
  • Increases the mass of air available in the cylinders
  • Improves torque, low-end performance and response under load
  • Reduces smoke emissions and improves diesel engine efficiency
  • With variable geometry, it adapts the effective turbine area according to engine demands
  • Allows better control of boost pressure compared to a conventional turbo with a simple wastegate
  • Works in close integration with engine management for performance and emissions

Model applications

  • IVECO Stralis/Trakker
  • Astra HD8
  • Irisbus Arway

Typical faults

  • Oil leakage from the turbine
  • Turbocharger noisy during both acceleration and deceleration
  • Smoke from the exhaust
  • Insufficient vehicle performance

Final conclusions

The OE code OE IVECO 504269281 identifies a turbocharger from the Holset HE431V family intended for 7.8-litre Cursor 8 engines, mainly used on IVECO Stralis/Trakker, Astra HD8 and some Irisbus Arway applications. It is a variable geometry unit with pneumatic actuation integrated into the engine management strategy, designed for Euro 4 industrial vehicle applications and related evolutions.

DIPA has a wide range of spare parts dedicated to the truck sector, construction vehicles and industrial equipment. It also offers reconditioned components with near-new performance that can provide savings on replacements while contributing to environmental protection through the circular economy. If the spare part you need is not available, don’t worry: DIPA can refurbish your part on demand, restoring full functionality and safety in a short time.