Reconditioned Turbo Dipa Sport Isuzu 5.2
- DiPa Code:
- TRB415R
- OEM Code:
- 8971038570
- Brand:
- DIPA SPORT
- Cod.Cross:
- Condition:
- Remanufactured
Warnings
ADVICE AND WARNINGS TO FOLLOW BEFORE REPLACING THE TURBO
Before changing the turbocharger, it is essential to fully understand the causes that led to its failure.
The operations described below, are fundamental to avoid a second failure and consequently a warranty claim.
In case of a warranty claim, the execution of these essential replacement/cleaning operations must be demonstrable through an invoice. If they do not appear, the warranty claim will NOT be considered.
DEPENDING ON THE IDENTIFIED ISSUE, PERFORM THE FOLLOWING OPERATIONS FOR A CORRECT REPLACEMENT OF THE TURBO.
LUBRICATION
- Thorough cleaning and/or replacement of the oil inlet and outlet pipes.
- The turbo failure may have generated metal shavings circulating freely in the lubrication system. Before performing the intervention, replace the lubricating oil along with the respective filter. After the intervention is completed, briefly run the engine to facilitate the removal of impurities and change the oil and filter again.
- Check that the oil pump pickup inside the sump is not clogged. If so, clean thoroughly and/or replace the oil pump.
- Check the efficiency and perform a thorough cleaning of the oil vapor recovery valve.
ASPIRATION ( The turbo whistles during acceleration )
- Check that the air intake hoses of the turbine do not have cracks; if they do, replace them. A small piece of rubber sucked in by the turbo that impacts against the impeller at a speed of 100.000 rpm has devastating effects.
- Change the air filter.
- Clean and/or replace the intercooler and the related hoses.
EXHAUST ( The turbo whistles on release)
- Check the integrity of the internal module of the FAP/DPF/CAT and replace it if necessary. If it is intact perform an internal regeneration/washing.
- Check the efficiency of the EGR valve. Carry out a thorough cleaning of it and the exhaust gas recirculation system ducts.
Details
Supplied without gaskets
Applications
ISUZU
ISUZU N (5th Generation)
| Model | Year of Production | Displacement | KW | HP | Cylinders | Fuel Type | Engine Code |
|---|---|---|---|---|---|---|---|
| N (5th Generation) | 2005-10-01 - | 5193 cc | 129 KW | 175 HP | 4 Cylinders | Diesel | 4HK1-XS |
Techinical Info
The turbocharger with OE code ISUZU 8971038570 is a forced-induction unit intended for diesel Isuzu 4HE1-T engines, used on light and medium commercial and industrial vehicles. It is a turbo assembly designed to increase the amount of air drawn into the engine, improve cylinder filling and allow higher torque output and continuity of operation under load.
Technical specifications
- Turbocharger family: RHF55 for diesel engines
- Application: Isuzu 4HE1-T
DIPA can intervene to overhaul these components thanks to its experience and expertise.
Functions
- Uses the energy of the exhaust gases to compress the air drawn into the engine
- Improves cylinder filling
- Increases the engine's driving torque
- Helps improve engine efficiency under load
- Helps maintain good performance even in heavy-duty use
- Suitable for vehicles that operate at full load or in continuous use
- Equipped with a pneumatic wastegate
Model applications
- Isuzu N-Series
Typical faults
- Loss of engine power
- Noises from the turbocharger
- Oil leakage on the compressor side or turbine side
- Smoke from the exhaust
Final conclusions
The turbocharger ISUZU OE 8971038570 is a forced-induction unit mainly intended for the Isuzu 4HE1-T 5.2 engine, with recurring power around 190 HP, and is attributable to the RHF55 family. The most likely and repeated applications concern the Isuzu N-Series.
DIPA has a wide range of spare parts dedicated to the Truck sector, construction vehicles and industrial equipment. Not only that: it offers remanufactured components with performance equivalent to new, allowing savings on replacements while contributing to environmental protection through the circular economy. If the spare part you need is not available, don't worry: DIPA can overhaul your part "on demand" returning full functionality and safety in a short time.