Egr Citroen Peugeot Ds Ford 2.0 Diesel

The EGR valve with OE code 9807593080 è is a modular component used on numerous PSA, Opel, Ford, and Toyota vehicles equipped with diesel engines 2.0 Euro 5 and Euro 6. It is an advanced version of the EGR valve with an integrated heat exchanger, designed to reduce nitrogen oxide (NOₓ) emissions through the controlled recirculation of exhaust gases during combustion. The module è consists of an electronic valve, a water-gas heat exchanger, and an integrated actuator, offering a’high thermal efficiency and reliable performance over time.

Technical features

The EGR module 9807593080 features a compact and multifunctional structure. The main technical characteristics include:

• Main body made of die-cast aluminum or reinforced composite material
• Integrated water-gas heat exchanger with separate passages for coolant and exhaust gas
• Electronically controlled EGR valve with a motorized actuator with 5 poles
• Presence of metal gaskets and fluoroelastomer O-ring seals for high sealing performance
• Integrated position sensor for controlling the opening percentage

The module è is designed for’direct installation on the exhaust manifold and connection with the cooling and intake circuit.

DIPA has a range of original and quality aftermarket spare partsà equivalent.

Functionalityà

The primary function of the EGR valve è is to reduce NOₓ emissions by reintroducing a percentage of exhaust gases into’the intake manifold. In the case of the version with an integrated heat exchanger, the gases are cooled before being reintroduced into the engine, improving the’efficiency of the combustion process and further reducing nitrogen oxides. The system è is fully controlled by the engine control unit, which regulates its’opening based on temperature, load, and engine speed. The presence of the EGR module contributes to compliance with Euro 5 and Euro 6 emission regulations.

Brand and model on which the part è is installed.

CITROËN

• C4 Grand Picasso
• C4
• C4 Picasso
• C5
• C5 Iii Break
• Ds4
• Ds5
• Jumper Autobus
• Jumper Van
• Jumper Chassis Cab/Frame
• Jumpy Bus
• Jumpy Van
• Jumpy Chassis Cab/Frame
• Spacetourer Bus

FORD

• C-Max
• C-Max  Van
• Focus
• Focus Pickup / Fastback
• Focus Pickup / Van / Mixed Use
• Focus Sedan
• Focus Estate
• Galaxy
• Grand C-Max
• Grand C-Max Van
• Kuga
• Mondeo 2 Sedan / Fastback
• Mondeo Three Volume
• Mondeo Turnier
• S-Max

PEUGEOT

• 3008 MPV / Space Wagon
• 3008 SUV
• 308
• 308 SW
• 5008
• 5008
• 508
• 508 Sw
• Boxer Bus
• Boxer Van
• Boxer Chassis Cab
• Expert Van
• Expert Chassis Cab
• Traveller Bus

DIPA recommends to always check compatibilityà based on the specific engine code and chassis number.

Defects and causes

The main defects that can compromise the operation of the EGR valve 9807593080 include:

• Clogging of the gas duct: due to’the accumulation of particulate matter and vaporized oil over time
• Failure of the’electric actuator: caused by internal breakage or errors in the control circuit
• Breakage of the heat exchanger: può can cause coolant leaks and overheating of the module
• Mechanical blockage of the valve: due to seizing from soot or internal corrosion
• Error in the position sensor: which prevents the control unit from properly modulating the’opening

The most frequent damages occur in the presence of oil in the intake circuit, irregular combustion, or the use of dirty fuel.ù Any associated DTC codes

DIPA highlights: before installing the valve in the vehicle, è it is essential to clean the entire intake/exhaust circuit (intake manifold, air hoses, throttle body, FAP/DPF, and all components related to exhaust gas and its recirculation). 

Final conclusions

The EGR valve with OE code 9807593080 è is a complex and strategic component in managing emissions for diesel engines 2.0 Euro 5 and Euro 6 of numerous PSA, Opel, and Ford vehicles. The module integrates gas recirculation and cooling functions, ensuring high performance and reliabilityà if properly maintained. However, its exposure to high-temperature exhaust gases and soot makes it prone to clogging and electronic failures.

DIPA offers a wide range of spare parts: from original ones to aftermarket options selected from the best manufacturers on the market. Moreover, it provides refurbished components with performance equal to new, allowing for cost savings during replacement and contributing to environmental protection.’thanks to’circular economy. Also ask about the availabilityà of refurbished parts ready in stock for quick interventions and without waiting times.